Fall Prevention

Proprietary Item

“Crimsafe Security Screens” by Crimsafe Security Systems Pty Ltd

Frame Type

Crimsafe Regular Window Frame

Tested To

All Crimsafe products have been tested to and pass the requirements of AS5039 – 2008 as prescribed in AS5041 Methods of Test – Security  screen doors & window grilles:
• Dynamic Impact Test
• Jemmy Test
• Pull Test
• Knife Shear Test
• Shear Test
• Probe Test

Warranty

10 years. Extended warranty available. Terms & Conditions apply.

External Testing To Relevant Industry & Architectural Standards

• JCU Cyclone Testing Station Report No. TS823 – Crimsafe 35.2m/s Cyclone Debris Screen to AS/NZS 1170.2:2011
• Azuma Cyclonic Debris Screen impact test up to 44m/s to AS/NZS 1170.2:2011
• Energy Efficiency rated under the WERS program
• Dulux & Chemetall 3000-hour Salt Spray Test
• Balustrade Testing – AS/NZS 1170.1:2002, Table 3.3 for occupancy type C5
• Curtain University Category 3 Cyclone Missile Test
• BHP Category 4 Cyclone Missile Test (Commercial grade)
• BHP Category 4 Cyclone Ballistics Test (Commercial grade)
• CSIRO Pressure Drop / Air Flow Test
• CSIRO Fire Attenuation Test FSZ – 0688
• Solar Heat Gain Coefficient Test NFRC 201-2004
• Shading Protocol Thermal Performance Test NFRC 102 – 2004
• University of W.A. Cyclone Pressure & Fatigue Tests to AS/NZS 1170.2:2002

Corrosion Resistance

Screens shall withstand 3,000 hours in the prohesion accelerated salt spray test.

Aluminum Grade

6063-T5

Security Mesh

Plain weave, 10 Count Mesh i.e: 10 strands on the weft x 10 strands on the warp, per square inch / 25.4mm of mesh. Woven to Standards ISO 9044/ ASTM E2016:06.

Wire

0.9 mm diameter high tensile 304 grade woven stainless steel security mesh.

Aperture

1.5mm x 1.5mm

Open Area

41.6%

Screw Clamps

“Screw-Clamp” by Crimsafe Security Systems Pty Ltd. fixed at 125mm centres

Clamp Cover

N/A

Fixing

Fix using Crimsafe 410 Stainless Steel tamper-resistant security head installation screws.

Colour

As specified

Surface Coating

Powder coat application as per AS4506: 2005 Metal Finishing for thermoset powder coatings